16 Output Expander, 8 Voltage & 8 Relays

ELK-M1XOVR

Adds 16 outputs (8 voltage, 8 relays) to M1 Gold or M1EZ8 Controls. Voltages can be used to trigger low current devices (50 mA max. each). Relays are SPDT rated for 7A @ 30 VDC, 10A @ 125 VAC. Operates from 4-wire data bus. Up to 12 output expanders may be used for a total of 208 outputs. Option: Convert 8 voltage outputs to relays using M1RB Relay Board.

ELK-M1XOVR

Product Details

• 8 Voltage Outputs
• 8 Single-Pole, Double-Pole Relay Outputs
• Operates on the 4-Wire Data Bus
• DIP Switch Address Settings
• Flash Memory for Firmware Updating
• One (1) - Twelve (12) Conductor "Flying Lead" Wire Harness
• Voltage Outputs may be converted to Relays using M1RB Relay Boards
• Status LED with Diagnostic Display
• Mounts in Enclosure using ELK-SWG Glides, SWP or SWP3 Structured Wire Plates, or Double Sided Foam Tape

• Voltage Outputs: 12 VDC @ 50 mA each
• Relay Outputs: SPDT rated for 7 Amps @ 28VDC, 10 Amps @ 125 VAC
• Wire Harness Length: 12"
• Operating Power Range: 9 to 14 VDC
• Current Draw: 65 mA Nom., 330 mA Max.
• Size: 6" x 3.25" x .75" H

Resources

• Output Expander - 8 Relays/8 Voltage Outputs
• ELK-SWG Circuit Board Mounting Glides 2/pack
• Relay Adapter, 12 Conductor Cable Assembly
• Instructions

ELK-W018B - 4-Pin Ribbon Cable - Used for connecting expanders and other peripherals to the M1 Control.

M1 Relay Board (converts voltage outputs to relays)
M1 Data Bus Hubs

Locate an ELK Authorized Distributor Near You!

For more infomation, call ELK at (800) 797-9355.