b'ALARM ENGINE CONNECTIVITY & COMMUNICATIONSELK-AEWFAlarm Engine Wi-Fi AdapterAn optional Wi-Fi adapter for the E27 Alarm Engine This adapter can be used in place of a hard wired Ethernet connection, allowing the E27 to access the local area network (LAN) and the InternetThe AEWF connects to the E27 board via a dedicated Wi-Fi connectorStandard supported: 80211b/g/nFrequency: 24 GHzCurrent draw: Approx 21mASize: 363" x 2" x 1" 7 62158 57006 3Includes 2 antenna optionsRoHS CompliantELK-AEXDDALARM ENGINE CONTROLS & ACCESSORIESAlarm Engine Digital Dialer/CommunicatorA Digital Dialer/Communicator for the E27 Alarm Engine, allowing communications with a Central Monitoring Station over a traditional landline telephone or dial capture cellular device It operates on the 4 wire data bus and features an 8-pin modular phone connector, status/diagnostic LEDs, and convenient test points for lineman\'s test setOperates from the E27 \'RS-485\' Data BusOperating Voltage: 138 VDCSupport Reporting Format: Contact ID 7 62158 57004 9Current Draw: 31mA nominal, 43mA maxBoard Size: 344" x 388" x 1"Housing Size: 425" x 6375" x 2125" RoHS CompliantALARM ENGINE Z-WAVE INTERFACE MODULEELK-AEZWZ-Wave Interface Module for the E27 Alarm Engine, allowing controlof a variety of Z-Wave devices, including lights, locks,thermostats, and garage doorThe AEZW connects to the E27 through a dedicated Z-Wave connectorZ-Wave Plus (500 Series)Supported Devices: Lights (On/Off and Dimmers), Appliance Modules, Thermostats, Locks, and Garage Doors (Barrier Operators)Current Draw: 50mACable Length:23" 7 62158 57005 6Housing Size: 363" x 2" x 1"RoHS Compliant14'