19 M1 Single Door Access Module A single door access interface module for use with M1 Controls. It installs in place of an M1 Keypad and operates from the RS-485 4-Wire Keypad Data Bus. • Input for a standard 26 bit Wiegand Reader • (3)12VDC Outputs for Door Held Open Alarm(50mA), Ready To Arm, and System Armed indications (10mA) • (2)Supervised Inputs for RTE (Request To Exit) Button/Device and Door Status Sensor • Four selectable Time settings for "Request to Exit" and "Door Held Open" • RoHS Compliant • Heavy Duty Form "C" Relay Contacts for Switching Door Strike Power • Connections: Plug-In Screw Terminals, 16 Position • Operating Voltage: 13.8VDC • Current Draw: Less than 30 mA with minimum activity, 44 mA fully active • Housing Dimensions: 4.25" x 6.375" x 2.125" • Circuit Board Dimensions: 3.95" x 2.875" x .95" • Hardware Watchdog Circuit ELK-M1KAM 7 62158 55052 2 Keypad Plug-in Proximity Reader Plugs into the connector inside the ELK-M1KP* or ELK-M1KPB* keypad. Allows a proximity card or fob to be used to quickly arm, disarm, operate a door strike, etc. • Reader format: 26 bit Wiegand • Read Distance: ~3/8" • 5 pin plug-in connector • Operating voltage: 5VDC from keypad • Current Draw: ~20mA • RoHS Compliant * Not compatible with other keypads - see ELK-106055 7 62158 55005 8 Requires M1PRC cards or M1PRF fobs ELK-M1PR M1 Proximity "Clam Shell" Cards For use with the add-on proximity readers: ELK-M1PR for the ELK-M1KP keypad or ELK-106055 exterior reader. • Comes in packs of (10) ten • Credit Card Size • Color: Off white • Size: 3.375" x 2.125" x .0625" • RoHS Compliant 7 62158 55006 5 ELK-M1PRC M1 Proximity Key Fobs For use with the add-on proximity readers: ELK-M1PR for the ELK-M1KP keypad or ELK-106055 exterior reader. • Comes in packs of (10) ten • Attaches to key chain • Color: Black • Size: 2.125" x 1.3125" x .25" • RoHS Compliant 7 62158 55007 2 ELK-M1PRF Exterior Proximity Reader Allows a proximity card or fob to be used with M1 Controls to quickly arm, disarm, operate a door strike, etc. • Weatherproof - suitable for outdoor installation • Size: 3.125"H x 1 .875"W x 1"D • Color: Black • Operating Voltage: 12VDC • Current draw: 50mA • Connects to M1KP & M1KPB Keypads with ELK-W035A harness • Connects to M1KP2 & M1KP3 Keypads with ELK-W039A harness • Can be used on any system that is 26 bit Wiegand compatible • RoHS Compliant ELK-106055 7 62158 55044 7 Requires M1PRC cards or M1PRF fobs Access Control M1 Controls & Accessories