All Products

The ELK-800 is compact, low cost audio amplifier designed for paging (public address) applications. The ELK-800 can be centrally or remotely installed. It operates on low voltage, thus saving money by requiring only 22-24 gauge telco or alarm type wire. It can drive multiple speakers and features short circuit protection and built-in volume adjust.

The ELK-P1216 is a general purpose 12 Volts D.C. Switching Plug-In Power Supply. It is ideal for alarm, access control, and CCTV applications requiring up to 1.5 Amps. The power pack plugs into 100 to 120 volts A.C., and supplies regulated 12 volts D.C. to a standard 2.1mm power plug.

The ELK-P1215 Power Supply/Battery Charger is a plug-in 14VDC Power Supply (ELK-P1417) combined with an intelligent Charger Board . It can supply up to 1.5 Amps of current at 12VDC (nominal). The charger board features a Low Battery Supervision output, Low Battery Cutoff, as well as a Manual On/Off switch. The Power Supply features built-in…

The ELK-P1224 Power Supply/Battery Charger is a plug-in 14VDC Power Supply (ELK-P1426) combined with an intelligent Charger Board . It can supply up to 2.4 Amps of current at 12VDC (nominal). The charger board features a Low Battery Supervision output, Low Battery Cutoff, as well as a Manual On/Off switch. The Power Supply features built-in…

The ELK-SWB14 is a smaller 14.25″ square version of the popular ELK-SWB28. It is ideal for smaller jobs such as small homes, apartments, condos, etc. It is extremely versatile for housing a security control and associated peripherals, or for use with telephone, CATV, and network, structured wiring components. Mix and match components from various manufacturers…

The ELK-SWB14P is a universal plastic enclosure. Unlike metal enclosures, the ELK-SWB14P will not interfere with RF signals, making it a ideal for E27 control installations that include a WiFi adapter, wireless receiver, and/or Z-Wave module. The ELK-SWB14P is designed to be surface mounted. It is extremely versatile for housing a security control and associated…

Multi-Purpose Horn Style Speaker Ideal for Alarm Systems or Paging

Adds 16 outputs (8 voltage, 8 relays) to M1 Gold or M1EZ8 Controls. Voltages can be used to trigger low current devices (50 mA max. each). Relays are SPDT rated for 7A @ 30 VDC, 10A @ 125 VAC. Operates from 4-wire data bus. Up to 12 output expanders may be used for a total…

Trusted, professional grade step down transformer for low voltage systems, such as Access Control, Security & CCTV.

Multi-purpose Interior Surface Mount Speaker Great for voice and sounds

Trusted, professional grade step down transformer for low voltage systems, such as Access Control, Security & CCTV.

Multi-purpose cabinet for structured wiring, controls, & peripherals. Versatile mounting for multiple manufacturer’s structured wiring modules; such as Leviton, OnQ, OpenHouse, and others. May be flush or surface mounted. Flush mounting is ideal for hollow frame walls with studs on 16” centers. The minimum rough opening is 14.25” wide, 28.25” high, 4.5” deep. Can be…

Navigator is a stylish new Touch Screen Keypad for use with the M1 Control System. It features a touch sensitive 3.5” LCD Color display with bright, easy to use graphic icons and softkeys. Connection to M1 panel is via the RS485 bus, making it simple for new or retrofit installations. Not only is Navigator stylish,…

3″ Adapter plate for mounting components, boards and devices into ELK Structured Wiring Enclosures

The ELK-44 is a universal 30 Watt – 8 Ohm Speaker which may be connected to any siren driver or amplifier. It features a heavy duty voice coil and magnet, allowing it to withstand up to 50 Watts of peak power. The ELK-44’s removable “U” shaped mounting bracket makes installation quick and simple. It’s small…

Multi-Purpose Horn Style Speaker Great for Voice or Sounds

The ELK-AEXRFA3 is a kit that consists of the ELK-AERF3 Alarm Engine 319.5MHz Wireless Receiver and the ELK-AEXRFA Alarm Engine Bus Adapter for RF Receiver in a plastic clam shell housing .

The ELK-AEXRFA3 is a kit that consists of the ELK-AERF3H Alarm Engine 345MHz Wireless Receiver and the ELK-AEXRFA Alarm Engine Bus Adapter for RF Receiver in a plastic clam shell housing .

The ELK-319PIRC is ideal for ceiling mount applications and provides a detection area of 14-40 feet, depending on the mounting height. This supervised motion sensor features selectable sensitivity and a built-in tamper switch. This sensor is compatible with Elk’s 319MHz Receivers/Panels as well as many other panels that operate on the 319.5MHz frequency. ELK’s 319…

The ELK-P412 is a general purpose high current power supply and battery charger. It is ideal for alarm, access control, and CCTV applications requiring up to 4 Amps. The ELK-P412 distributes 12VDC power to three (3) sets of DC power terminals, each having a voltage present indicator LED and automatic resetting overload protection. It also…

The ELK-319KF4 is a Wireless 4 Button Handheld device which can be used to arm or disarm the alarm system. It also features two additional buttons that can be utilized to execute other functions, depending on the functionality provided by the control. This sensor is compatible with Elk’s 319MHz Receivers/Panels as well as many other…

The ELK-120 v.3 features 4 channels that can be configured as 2 channels of siren and 2 channels of voice, or all 4 channels can be used for voice. Either way the voice channels are fully recordable and are stored in non-volatile re-programmable memory. Total time of recording is 8 minutes. The Siren channels offer…

Used for connecting expanders and other peripherals to the M1 Control.

Convenient multi-purpose adapter plate accommodates many M1 expanders and peripherals. This versatile adapter also provide mounting for a variety of ELK components including relays, siren drivers, power supplies and more! For use with ELK structured wiring enclosures.

Heavy duty, horn speaker when maximum volume and clarity are a must. Great for voice or sounds!

The ELK-P624 is a general purpose regulated power supply and battery charger. It is ideal for alarm, access control, and CCTV applications requiring up to 1 Amp continuous current. Automatic resetting “fuseless” overload protection means never having to return to a job site to replace a blown fuse. On-board diagnostic LEDs indicate the presence of…

ELK Products is excited to announce the release of the Alarm Engine (AE) app for the ELK-7TS touchscreen, delivering a modern, interactive interface for intuitive, on-premises system control. Designed to match the look and feel of the ElkConnect mobile  app, this update ensures a seamless user experience—whether you’re interacting from your wall-mounted touchscreen or your…

Discover the new ELK-7TS 7” touchscreen for M1 Cross Platform Control. An all-new M1 touchscreen application introduces users to a fresh and modern interface for M1 systems.

The ELK-124 is an 8 channel recordable voice module. It is ideal for applications such as telephone on-hold announcements, security and access control warnings, museum narrations, and more. Each channel can hold up to 1 minute of recorded voice and/or music with a combined total record time of 8 minutes. Recording is quick and easy…

This deluxe 90° swivel mounting bracket has a short extended arm and allows the sensor to be aimed at up to a 90° offset from the wall or base. This bracket also allows the sensor to be drop mounted from a ceiling.

Adds 16 hardwired zones (EOL resistor supervised) to the E27 Alarm Engine. Operates from 4-wire data bus. Up to 7 of these can be used, increasing total zones (inputs) to 128.  Also provides 1 Form “C” relay output.  Features DC power & battery connectors, allowing easy connection of remote power source/backup battery.

Adds 8 relays to the E27 Alarm Engine. Operates from 4-wire data bus. Up to 3 of these can be used, increasing total ouptuts to 32.  Features DC power & battery connectors, allowing easy connection of remote power source/backup battery.

The ELK-AEXRFA is an adapter for connecting an Alarm Engine RF receiver/transceiver to the Alarm Engine RS-485 data bus. It accepts an ELK-AERF3 319.5MHz receiver or ELK-AERF9 Two-Way transceiver. Up to 4 AEXRFA adapters may be connected to the data bus. The adapter comes in a plastic clam shell housing.

The ELK-AEXCELLA Alarm Engine Cellular Communicator enables Alarm Engine controls to communicate with a Central Station and provides a pathway for system communication via the AT&T LTE cellular network. It connects to the RS-485 data bus, with activation and setup managed through the ElkConnect portal. If the IP pathway becomes unavailable, the E27 control automatically…

The ELK-AEXCELLV enables Alarm Engine controls to communicate with a Central Station and provides a pathway for system communication via the Verizon LTE cellular network. It connects to the RS-485 data bus, with activation and setup managed through the ElkConnect portal. If the IP pathway becomes unavailable, the E27 control automatically communicates over the cellular…

The ELK-AEXDD is an advanced Digital Dialer/Dial Capture Cellular Interface Module for the E27 Alarm Engine. This innovative device utilizes cutting-edge cellular dial capture technology to establish direct, reliable communication to Central Monitoring Stations. With the ELK-AEXDD, you’re not just getting a communicator; you’re upgrading to uninterrupted, cellular-based communication that ensures your security system is…

The ELK-AEDBHR is an “active” RS-485 data bus hub designed for jobs where an Alarm Engine Control is retrofitting an older panel that has multiple homerun 4 conductor keypad/data wires. It splits the main 485 data bus into 4 managed 485 branches. Each branch can have 2 parallel home run cables for a total of…

The ELK-AEWF is a optional Wi-Fi adapter for the E27 Alarm Engine. This adapter can be used in place of a hard wired Ethernet connection, allowing the E27 to access the local area network (LAN) and the Internet. The AEWF connects to the E27 board via a dedicated Wi-Fi connector.

The ELK-AERF3 is a one-way wireless receiver that allows the E27 Alarm Engine to support ELK’s 319.5MHz wireless line of sensors. This receiver connects to a dedicated connector on the E27 board. It features LED indicators for status and RF signals. The E27 supports up to 5) AERF3 receivers.

The ELK-AERF3H is a one-way wireless receiver that allows the E27 Alarm Engine to support 345 MHz wireless sensors, including Honeywell 5800 Series sensor and MaxOut™ Tech 345 MHz sensors. This receiver connects to a dedicated connector on the E27 board. It features LED indicators for status and RF signals. The E27 supports up to…

The ELK-AERF9 is a two-way wireless transceiver that allows the E27 Alarm Engine to support ELK’s Two-Way Wireless sensors. This receiver connects to a dedicated connector on the E27 board or to the ELK-AEXRFA Alarm Engine RF Bus Adapter.  It features LED indicators for status and RF signals. The E27 supports up to 4) AERF9…

The ELK-AEZW Alarm Engine Z-Wave Interface Module is a primary controller that allows the E27 to control a variety of Z-Wave devices. Supported Z-Wave devices include lights (dimmers), locks, thermostats, garage door, and output devices (on/off switches, outlets, relays, appliance modules, etc). The AEZW connects to the E27 through a dedicated Z-Wave connector.

Now in UV resistant Industrial Gray!  The ELK-319DG is a Supervised, Wireless Sensor uniquely designed for outdoor use on swing gates or doors. The sensor and magnet can be mounted using screws (included), pipe strap style clamps, or plastic wire ties. This sensor is compatible with Elk’s 319MHz Receivers/Panels as well as many other panels…

Provides 3 zones of amplified speaker outputs with adjustable volume, along with 3 zones of microphone inputs. The M1TWA can be used to add two way listen-in to the M1 Control or to just add amplified speakers at keypads and other locations in a building. Each of the 3 amplified speaker zones can drive a…

Double Sided Mounting Tape with an aggressive pressure sensitive permanent adhesive on both sides. Package contains an assortment of three (3) thicknesses; 1/16″, 1/8″, and 1/4″. This tape can be used in place of mechanical fasteners to mount relays, siren drivers, and many other devices to various surfaces. It is flexible and conforms to irregular…

The ELK-BLT Battery Life Tester or .Mhos Meter. is a compact, easy to use service tool for testing 12 Volt rechargeable batteries. The BLT measures internal conductivity (Mhos), which is the best indicator of a battery’s health and life expectancy. Mhos happens to be the inverse of Ohms (conductance as opposed to resistance). The BLT…

Holds up to an 8 Ah Battery.

The ELK-6051 combines a proven, high reliability electro-chemical carbon monoxide sensor with ELK’s Two-Way Wireless technology for use with Elk’s two-way wireless compatible controls: ELK-M1XRFTWM Transceiver and the ELK-M1 Control ELK-AERF9 Transceiver and the ELK E27 Alarm Engine The sensor has a 10-year life and the unit operates from 2 AAA batteries. AudioLINK diagnostic app provides…

A Great, Space Saving Mounting Option! Pack of 2 board glides for mounting of Security and Automation Controller boards.

The ELK-74 is a Two-Tone (Yelp & Steady) Siren mounted in an attractive surface mount plastic enclosure. This versatile Echo™ Series siren is designed to be heard but not seen! Sound “echoes” off mounting surface from back plate edge. This unique contemporary siren has a smooth, paintable, “no grill” surface that easily blends with any…

The ELK-73 is a 20 Watt, 8 Ohm Speaker mounted in an attractive surface mount plastic enclosure. This versatile Echo™ Series speaker is designed to be heard but not seen!. Sound “echoes” off mounting surface from back plate edge. This unique contemporary speaker has a smooth, paintable, “no grill” surface that easily blends with any…

The ELK-129 Computer Sound Card Interface allows a computer’s speaker output to be used as one of the tools for programming sounds into the ELK Recordable Modules, such as the ELK-120 or ELK-124. Includes software to download your compute’s audio files (WAVs) to the Recordable Modules. Waveloader Software for ELK-129

For easy connection of expanders & keypads. The M1DBH accepts up to 9, RJ45 equipped CAT5 or CAT6 cables, and series connects the data A & B lines so the data bus may be terminated properly. Two or more units may be interconnected if more than 9 data lines are required.

The ELK-960 Delay Timer is designed to be an economical and flexible solution for any general-purpose timer application. The unit can be configured for use on 12 to 24V systems, with positive or negative trigger logic. Positive triggers can be as low as 4.5V. Setup is quick and easy with thumbwheel adjustment between 1 and…

The ELK-DS47TS provides a versatile, stylish solution for mounting the ELK-7TS touchscreen for desk, table, or countertop use. Designed for easy installation, it features pre-drilled mounting holes that perfectly fit the ELK-7TS backplate, ensuring a secure fit. A large cable access hole in the stand simplifies wiring, while the wedge design offers excellent cable management…

The ELK-930 performs three functions. It can detect ring activation from one or two doorbell buttons and a single telephone line. It conveniently isolates the voltage and current and produces an open collector (pull to ground) output which can be used to trigger an automation controller, relay, timer, etc. The circuit is pre-scored so that…

The ELK-999 contains 130 pieces of double faced 1/4″ thick closed cell foam tape with an aggressive pressure sensitive permanent adhesive on both sides. This tape can be used in place of mechanical fasteners to mount relays, siren drivers, and many other devices to various surfaces. It is flexible and conforms to irregular surfaces.

Increase the back-up battery capacity of E27 or M1 control by installing dual back-up batteries. Replaces factory battery wires.

The ELK-W120 fused, dual connection (piggyback) battery wires are designed to facilitate the connection of two devices to a battery. For example, a backup battery for an alarm system can also be connected to an alarm sounder, allowing the sounder pull power directly from the battery. This can be helpful when using an alarm sounder…

Seconds count in an emergency situation to save lives and assets. ELK’s C1M1 Dual Path Communicator significantly reduces transmission time of emergency messages. It connects directly to the M1 Control and does not require dial capture or data bus decoding which leads to delays with other communicators. In addition, there is no cloud server to…

Seconds count in an emergency situation to save lives and assets. ELK’s C1M1 Dual Path Communicator significantly reduces transmission time of emergency messages. It connects directly to the M1 Control and does not require dial capture or data bus decoding which leads to delays with other communicators. In addition, there is no cloud server to…

The ELK-955 is a Two-Line RJ31X/38X Telephone Jack containing solid state transient suppression designed to protect the telephone inputs on an alarm control. It responds to power surges and transients in less than 1 nanosecond, automatically restoring after each surge within the specified ratings.

Self-Contained Siren Two Tones, Yelp & Steady

Self-Contained Siren Two Tones, Yelp & Steady

Self-Contained Siren Two Tones, Yelp & Steady Surface Mount (hardware included)

ELK’s E27 Alarm Engine® is a hybrid alarm control for intrusion & safety, supporting both hardwired & wireless sensors.  An on-board Ethernet port & optional Wi-Fi adapter provide secure connectivity with multi-layered authentication & encrypted communications. E27 offers powerful automation with simplified scheduling & a robust rules engine for unrestricted customization.  Easy integration with Z-Wave…

This package includes: E27 Alarm Engine Control Board AEKP LCD Keypad SWB14 Metal Enclosure P1426 Power Supply 73 Echo™ Paintable Interior Speaker

This package includes: E27 Alarm Engine Control Board AEKP LCD Keypad SWB14P Plastic Enclosure P1426 Power Supply 73 Echo™ Paintable Interior Speaker

The ELK-71 is a Two-Tone (Yelp & Steady) Siren mounted in an attractive surface mount plastic enclosure. This versatile Echo™ Series siren is designed to be heard but not seen! Sound “echoes” off mounting surface from back plate edge. This unique contemporary siren has a smooth, paintable, “no grill” surface that easily blends with any…

The ELK-70 is a 20 Watt, 8 Ohm Speaker mounted in an attractive surface mount plastic enclosure. This versatile Echo™ Series speaker is designed to be heard but not seen!. Sound “echoes” off mounting surface from back plate edge. This unique contemporary speaker has a smooth, paintable, “no grill” surface that easily blends with any…

ElkConnect® brings the power of the Alarm Engine platform to life. This advanced app and cloud portal streamlines system configuration, management, and control with powerful tools and a consistent user experience. A robust automation environment fuels the Alarm Engine with simplified customization and unrestricted creation of rules. Both the ElkConnect app and portal provide a…

The ELK-POE47TS is an Ethernet and PoE Adapter designed for use with the ELK-7TS Touchscreen. It provides two different functions as described below. The ELK-POE47TS can be used as an Ethernet adapter. It provides a method of connecting the ELK-7TS to a network via a network patch cable when Wi-Fi is unavailable or not preferred….

Turn the SWB14 into a flush mount enclosure! Flush mounting is ideal for hollow stud walls on 16” centers.

ELK-SP12F is a flush mount, interior speaker. It is ideal for alarm or voice applications and flush mounts for a clean, designer look. Installers will applaud the easy installation, utilizing standard, single gang electrical boxes. The low profile design and single gang wall plate size allows the unit to be unnoticed at outlet height. The…

This wireless keychain remote provides 4 push buttons, LED feedback indicator and features Elk’s industry leading two-way technology, designed for use with Elk’s two-way wireless compatible controls: ELK-M1XRFTWM Transceiver and the ELK-M1 Control ELK-AERF9 Transceiver and the ELK E27 Alarm Engine   From the remote it is possible to arm, disarm, check status, and trigger…

The ELK-319GB Glass Break Sensor is designed to detect sound patterns of breaking glass. This supervised glass break sensor features selectable sensitivity and a built-in tamper switch. Utilizing the 319.5 MHz operating frequency, the ELK-319GB is compatible with many popular systems, including ELK’s M1 Controls. This wireless glass break sensor, along with ELK’s full line…

The ELK-6040 Wireless Glass Break Sensor is designed for use with Elk’s two-way wireless product line for use with Elk’s two-way wireless compatible controls: ELK-M1XRFTWM Transceiver and the ELK-M1 Control ELK-AERF9 Transceiver and the ELK E27 Alarm Engine The 6040 listens for actual patterns of breaking glass across the full audio band using Pattern Recognition Technology™….

Pack of 2 grommet donuts

The ELK-319HRR is a Supervised, Wireless Heat Sensor. It uses a solid-state thermistor to sample and trigger an event at a selectable setpoint of either 135 or 200 degrees F. It can also trigger an event if the temperature rises 12 degrees F or more during a one (1) minute time period. This sensor is…

The ELK-319PB1 is a Wireless Heavy Duty Panic Button device that that transmits to an alarm panel when pressed. It can be used police, medical, etc. alarm activation. This sensor is compatible with Elk’s 319MHz Receivers/Panels as well as many other panels that operate on the 319.5MHz frequency. ELK’s 319 Series Sensors are ideal for…

The ELK-9200 is a Heavy Duty Relay/Contactor inside a lockable metal enclosure. It is designed for remotely controlling high current devices such as electric water heaters, pumps, motors, gates, etc. The energizing coil of the 9200 is 110 VAC, however its relay contacts are capable of switching 220 VAC at up to 30 Amps of…

The ELK-100 Siren Driver is a great choice for residential and commercial security installations. It draws less current than most siren drivers, and offers two volume levels (example: one indoor, the other outdoor) simultaneously. Our exclusive MilliMiser™ option allows further reduction of current draw for controls that have limited alarm or auxiliary output power. The…

The ELK-130 is an exceptionally loud, industrial grade siren driver utilizes an intense sweeping yelp sound. With its wide operating voltage range, loudness, and the capability of powering from one source while being triggered from another, the ELK-130 is like no other loud siren. This unique driver is ideal for security, early warning, crowd protection,…

The ELK-952 provides exceptional protection against damage from lightning, voltage spikes, and surge damage coming into a phone line. It installs between the RJ31X Phone Jack and the Security Control. The ELK-952 features multi-stage protection and is 5 times faster than MOVs.

The ELK-M1KP is an addressable LCD Keypad for the M1 Cross Platform Controls®. It features a 32 character back lighted display with adjustable intensity and extra large character fonts for ease of readability. The M1KP includes a plug-in connector on the back for adding an internal proximity reader (ELK-M1PR) or for interfacing to virtually any…

The ELK-M1KP is an addressable LCD Keypad for M1 Controls. It features a 32 character, backlit display with adjustable intensity and extra large character fonts, improving readability. Six (6) function (“F”) keys can be programmed to contact emergency services or perform tasks; such as, controlling lights, watering the lawn, closing or opening the garage door,…

Small, economical, arm/disarm station for M1 Controls which fits into single gang box and utilizes a standard decorator style faceplate (not included). Particularly well suited for partitioned jobs such as an office, workshop, garage, etc., but can also be used as the main keypad for any installation. Displays basic system status with 3 LEDs: Green…

The ELK-M1XSP is a “3 in 1” product for additional serial ports and for integration with lighting systems and thermostats. Jumpers on the M1XSP select the appropriate application, connection, and protocol. Best of all, the M1XSP operates from the 4-wire (RS-485) M1 Keypad data bus, allowing RS-232 ports to be located long distances from the…

The ELK-965 is a Low Battery Cutoff Module combined with a Master Power Switch. It is designed to work with virtually any 12 Volt control panel or power supply. In the event of an extended power outage, the ELK-965 sensing circuit automatically disconnects the battery when the voltage falls below 10 Volts DC. This helps…

The ELK-AEKP is a low profile, addressable LCD Keypad for the E27 Alarm Engine. It features a 32 character blue/white backlighted display, blue lighted keys, 4 programmable function keys, along with the ELK menu navigation keys. It may also be recess ‘flush’ mounted using with a separately purchased back box kit (ELK-M1BBK2). The AEKP is…

The ELK-M1KP2 is a low profile, addressable LCD Keypad for the M1 family of Cross Platform Controls®. It features a 32 character blue/white backlighted display, blue lighted keys, 4 programmable function keys, along with the ELK menu navigation keys. It may also be recess ‘flush’ mounted using with a separately purchased back box kit (ELK-M1BBK2)….

Adds 16 hardwired zones (EOL resistor supervised) to the M1 Gold or M1EZ8 Controls. Operates from 4-wire data bus. Up to 12 of these can be used, increasing total zones (inputs) to 208.

An “active” RS-485 data bus hub designed for jobs where an M1Gold or M1EZ8 Control is retrofitting an older panel that has multiple homerun 4 conductor keypad/data wires. It splits the main 485 data bus into 4 managed 485 branches. Each branch can have 2 parallel home run cables for a total of 8 home…

The ELK-M1XEP is an Ethernet Appliance with a RS-232 Serial Port Interface. It may be used to connect a control in the M1 Family to an Ethernet network. It features email event notification and FIPS compliant encryption algorithms for security sensitive environments. It is powered by an ELK-P1216 12 Volts DC, 1.5 Amp plug-in power…

This package includes: M1 Gold Control Board M1KP LCD Keypad 1280 8Ah Battery TRG1640 AC Transformer 73 Echo™ Paintable Interior Speaker 952 In-line Telephone Surge Protector RJSET Telco Jack & Cord

This package includes: M1 Gold Control Board M1KP2 LCD Keypad 1280 8Ah Battery TRG1640 AC Transformer 73 Echo™ Paintable Interior Speaker 952 In-line Telephone Surge Protector RJSET Telco Jack & Cord

This package includes: M1 Gold Control Board SWB14 Enclosure 952 In-line Telephone Surge Protector

This package includes: M1 Gold Control Board SWB14 Enclosure 1280 8Ah Battery TRG1640 AC Transformer 73 Echo™ Paintable Interior Speaker 952 In-line Telephone Surge Protector RJSET Telco Jack & Cord

This package includes: M1 Gold Control Board M1KP LCD Keypad SWB14 Enclosure 1280 8Ah Battery TRG1640 AC Transformer 73 Echo™ Paintable Interior Speaker 952 In-line Telephone Surge Protector RJSET Telco Jack & Cord

This package includes: M1 Gold Control Board M1KP2 LCD Keypad SWB14 Enclosure 1280 8Ah Battery TRG1640 AC Transformer 73 Echo™ Paintable Interior Speaker 952 In-line Telephone Surge Protector RJSET Telco Jack & Cord

M1 Gold Control Board Only *TERMINAL BLOCKS NOT INCLUDED* M1 Gold Security and Automation Controls provide the ideal combination of security, energy management, and integrated control solutions. M1 provides rock solid security and life safety with comprehensive detection and state-of-the-art reporting capabilities. It features a fast microprocessor for enhanced speed, capability and security. A onsite…

Complete set of terminal blocks for the M1 Gold.

The ELK-M1XSLC interface kit contains the necessary ELK components (ELK-M1XSLU and ELK-IP232) for integration with Lutron Caséta Wireless, RA2 Select, or Homeworks QS devices. This kit facilitates communication with the Lutron Smartbridge Pro allowing M1 to control Caséta lights and shades. It also supports communication with the Lutron Homeworks QS Processor allowing M1 to control…

Allows a proximity card or fob to be used with the ELK-M1KP and ELK-M1KPB Keypads to quickly arm, disarm, operate a door strike, etc. Ideal for higher security installations and as an alternative to remembering PIN codes. Plugs into back of the Keypad. Uses M1PRC cards or M1PRF fobs. Includes one prox card.

The ELK-M1KP3 is an addressable, surface mount LCD Keypad for the M1 family of Cross Platform Controls®. It features a 32 character blue/white backlighted display, blue lighted keys, 4 programmable function keys, along with the ELK menu navigation keys. The M1KP3 is compatible with “external” 26 bit Wiegand compatible proximity readers, allowing cards or fobs…

ElkRP is a programming and management environment for maintaining the setup of customer’s accounts. It is much more than just an upload/download software package. It is a database-driven application with an intuitive user interface that allows you to see, at a glance, all the information pertinent to a specific installation. All the accounts in the…

The ELK-M1XSLZW is a dedicated Elk-M1 serial expander for connecting an M1 Control to a Leviton VRC0P-1LW Z-Wave Controller.   This interface allows M1 to control Z-Wave lights, thermostats, and locks through the Leviton VRC0P-1LW Controller. The Leviton VRC0P-1LW Controller has been discontinued. The ELK-M1XSLZW is available as a part for service purposes only.  Please contact…

The ELK-M1XSLU is a dedicated Elk-M1 serial expander for connecting an M1 Control to a Lutron RadioRA2 Main Repeater. RadioRA2 is a wireless multi-room control system for Lights, Shades, and HVAC Thermostats. Interfacing a RadioRA2 system to an M1 allows control in response to security system actions or conditions. With the automation and remote capabilities…

Microphone and 20 Watt speaker combination for use with M1 Two-Way Listen-In Interfaces

The M1XRFTWM two-way wireless transceivers allow an ELK-M1 or ELK-M1EZ8 control to accept Elk’s complete line of two-way wireless sensors. The ELK-M1XRFTWM has been optimized to provide superior signal reception and reliability in multi-transceiver applications. The ELK-M1XRFTW has been replaced by the ELK-M1XRFTWM. The ELK-M1XRFTWM performs all the functions of the ELK-M1XRFTW and is suitable…

The ELK-M1XRF319 is a Wireless (RF) Receiver and Input Expander for use with the ELK-M1 and ELK-M1EZ8 Controls. The receiver connects to the four (4) wire data (keypad) bus of the control and integrates in much the same way as a M1XIN hardware zone expander except that a single M1XRF can handle up to 144…

The ELK-M1XRF2H is a Wireless (RF) Receiver and Input Expander for use with the ELK-M1 and ELK-M1EZ8 Controls. This receiver is compatible with Honeywell (Ademco) 5800 series wireless transmitters. The M1XRF2H connects to the four (4) wire data (keypad) bus of the control and integrates in much the same way as a M1XIN hardware zone…

Monitor high or low temperatures with this add-on remote sensor. Connects to any main zone on the M1 Gold (1-16) or M1EZ8 (1-8). Range is -50 to +140F. Applications include: freeze monitoring, second homes, agricultural uses, etc. Temperature may be accessed from keypad, telephone remote control, or rules. Compatible with M1 Controls Only. This device…

Monitor high or low temperatures with this add-on remote sensor. Connects to any main zone on the M1 Gold (1-16) or M1EZ8 (1-8). Range is -50 to +140F. Applications include: freeze monitoring, second homes, agricultural uses, etc. Temperature may be accessed from keypad, telephone remote control, or rules. Compatible with M1 Controls Only. This device…

This “Ready to Install” value package includes: M1EZ8 Control Board M1KP LCD Keypad UB12 12″ Metal Enclosure 1250 5Ah Battery TRG1640 AC Transformer SP35 Interior Speaker RJSET Telco Jack & Cord

This “Ready to Install” value package includes: M1EZ8 Control Board M1KP2 LCD Keypad UB12 12″ Metal Enclosure 1250 5Ah Battery TRG1640 AC Transformer SP35 Interior Speaker RJSET Telco Jack & Cord

The ELK-M1EZ8MSI Main Serial Port Interface allows direct RS-232 Serial Communications to an M1EZ8 Control for Upload/Download programming, and for interfacing with other Computer type devices. Also required when adding the M1XEP Ethernet Port to an M1EZ8 Control. The speed of this port is software selectable from 300 to 115,200 baud.

M1EZ8 – Control Board Only M1EZ8 offers an economical solution for installations not requiring the voice and telephone remote control capability of the M1 Gold. Unlike controls that only offer basic security capability, M1EZ8 is a powerful, rock solid security control with the most imaginative automation functionality available. Built on the same software architecture as…

This 5-pin cable is required for connecting ELK-106055 proximity reader or any manufacturer’s 26 bit Wiegand reader to an M1KP or M1KPB keypad.

This two pin cable is used to connect a 26 bit Wiegand reader (such as the ELK-106055) to the ELK-M1KP2 or M1KP3 Keypad.

The ELK-964B20 is a pack of 20 Master Power Switches. It is designed to work with virtually any 12 Volt control panel or power supply. This convenient power switch permits the installer or user to easily disconnect both the Battery and the AC power from the control or power supply.

The ELK-319DWM is a Supervised, Wireless Door Sensor that detects the opening and closing of doors or windows. This sensor is compatible with Elk’s 319MHz Receivers/Panels as well as many other panels that operate on the 319.5MHz frequency. ELK’s 319 Series Sensors are ideal for Interlogix systems in need of replacement sensors.

This exceptionally thin wireless window sensor. It is perfect for double hung and casement style wood/vinyl windows and features Elk’s industry leading two-way technology. Available in white and brown.  Designed for use with Elk’s two-way wireless compatible controls: ELK-M1XRFTWM Transceiver and the ELK-M1 Control ELK-AERF9 Transceiver and the ELK E27 Alarm Engine

For attaching M1 expansion boards and other manufacturer’s boards to the ELK-SWP3 and ELK-SWP4 Plates.

The ELK-6030P Wireless PIR Motion Sensor features Pet Immunity for small animals up to 40lbs. It is designed for use with Elk’s two-way wireless compatible controls: ELK-M1XRFTWM Transceiver and the ELK-M1 Control ELK-AERF9 Transceiver and the ELK E27 Alarm Engine Intended to be used in residential and light commercial installations, the PIR incorporates advanced features…

Intended to be used in residential and light commercial installations, the PIR incorporates advanced features designed to ensure reliability, ease of installation, and provide innovative security enhancements. Designed for use with Elk’s two-way wireless compatible controls: ELK-M1XRFTWM Transceiver and the ELK-M1 Control ELK-AERF9 Transceiver and the ELK E27 Alarm Engine To simplify installation, ELK’s Wireless…

The ELK-P1417 14VDC plug in power supply features built-in overload reset and screw terminals for connections. It is ideal for alarm, access control, and CCTV applications requiring up to 1.7 amps. A receptacle mounting bracket is included.

The ELK-P1426 14VDC plug in power supply features built-in overload reset and screw terminals for connections. It is ideal for alarm, access control, and CCTV applications requiring up to 2.6 amps. A receptacle mounting bracket is included.

These Power Distribution Modules conveniently distribute a single A.C. or D.C. input into nine individual outputs, for centrally powering Video Cameras, PIRs, Photobeams, etc. Each output is protected with an auto-resetting PTC to protect a shorted output from disabling the other outputs. A visual LED power indicator is provided for each output along with a…

These Power Distribution Modules conveniently distribute a single A.C. or D.C. input into nine individual outputs, for centrally powering Video Cameras, PIRs, Photobeams, etc. Each output is protected with an auto-resetting PTC to protect a shorted output from disabling the other outputs. A visual LED power indicator is provided for each output along with a…

The ELK-P1215K Power Supply/Battery Charger Kit is a plug-in 14VDC Power Supply (ELK-P1417) combined with an intelligent Charger Board and a 12V 5Ah Battery(ELK-1250). It can supply up to 1.5 Amps of current at 12VDC (nominal). The charger board features a Low Battery Supervision output, Low Battery Cutoff, as well as a Manual On/Off switch….

White, general purpose, paintable box for housing wire splices, relay modules, etc. Mounts to a single gang electrical box. Features 6 removable wire entry slide tabs which are compatible with surface raceway conduit. Mounting hardware included.

For use with the add-on proximity readers: ELK-M1PR for the ELK-M1KP keypad or ELK-106055 exterior reader.

For use with the add-on proximity readers: ELK-M1PR for the ELK-M1KP keypad or ELK-106055 exterior reader

The ELK-M1BBK2 is an optional back box kit for that allows the ELK-M1KP2 keypad to be flush (recess) mounted.

The ELK-319DR is a Supervised, Wireless Door Sensor uniquely designed for recess mounting on the inside edge of a door and its frame. The sensor is virtually invisible when the door is closed. This sensor is compatible with Elk’s 319MHz Receivers/Panels as well as many other panels that operate on the 319.5MHz frequency. ELK’s 319…

The ELK-6023 Wireless Recessed Door Sensor is the ultimate wireless security device for discriminating customers. It mounts into a 3/4” drilled hole in a wooden door jamb and becomes nearly invisible once the door is closed. It features Elk’s Industry Leading Two-Way Technology with positive signal acknowledgment, extended range, and long battery life. Designed for…

May be plugged directly into an E27, M1G, M1EZ8, M1XOV, or M1XOVR to convert the voltage outputs into SPDT relays rated for 7A @ 30 VDC, 10A @ 125 VAC.

The ELK-912B is a heavy duty relay module featuring 12 or 24V DC selectable operation, SPDT Form “C” contacts, low current draw, voltage input LED, and high quality large cross-head terminals. It is ideal for general purpose switching of devices or high current loads. Also available in a 6 pack (ELK-912B6) which is packaged as…

The ELK-912 is a high quality 12 Volt DC relay with SPDT (Form “C”) dry contacts. It features low current draw, positive or negative activation, and is ideal for general purpose switching of devices or high current loads. Also available in a 12 pack (ELK-91212) which is packaged as multiple relay modules grouped on a…

For use in areas with poor cellular service

For use with ELK-SWB28 Structured Wiring Enclosure

Replacement magnets are avaialble in 10 packs for the following sensors: ELK-6020,  Part Number ELK-SM20 ELk-6020BR,  Part Number ELK-SM20BR ELK-6021,  Part Number ELK-SM21 ELK-6022,  Part Number ELK-SM20 ELK-6023,  Part Number ELK-SM23 ELK-6023,  Part Number ELK-SM23BR

ELK Sealed Lead Acid Batteries are excellent for the following applications with regard to size, Amp hour rating, and proper terminal connections: battery backup (for Access Control Systems, Fire Alarm Systems, and Security Alarm Systems), emergency lights, lighted exit signs, and uninterruptible power supplies.

ELK Sealed Lead Acid Batteries are excellent for the following applications with regard to size, Amp hour rating, and proper terminal connections: battery backup (for Access Control Systems, Fire Alarm Systems, and Security Alarm Systems), emergency lights, lighted exit signs, and uninterruptible power supplies.

ELK Sealed Lead Acid Batteries are excellent for the following applications with regard to size, Amp hour rating, and proper terminal connections: battery backup (for Access Control Systems, Fire Alarm Systems, and Security Alarm Systems), emergency lights, lighted exit signs, and uninterruptible power supplies.

ELK Sealed Lead Acid Batteries are excellent for the following applications with regard to size, Amp hour rating, and proper terminal connections: battery backup (for Access Control Systems, Fire Alarm Systems, and Security Alarm Systems), emergency lights, lighted exit signs, and uninterruptible power supplies.

ELK Sealed Lead Acid Batteries are excellent for the following applications with regard to size, Amp hour rating, and proper terminal connections: battery backup (for Access Control Systems, Fire Alarm Systems, and Security Alarm Systems), emergency lights, lighted exit signs, and uninterruptible power supplies.

ELK Sealed Lead Acid Batteries are excellent for the following applications with regard to size, Amp hour rating, and proper terminal connections: battery backup (for Access Control Systems, Fire Alarm Systems, and Security Alarm Systems), emergency lights, lighted exit signs, and uninterruptible power supplies.

ELK Sealed Lead Acid Batteries are excellent for the following applications with regard to size, Amp hour rating, and proper terminal connections: battery backup (for Access Control Systems, Fire Alarm Systems, and Security Alarm Systems), emergency lights, lighted exit signs, and uninterruptible power supplies.

ELK Sealed Lead Acid Batteries are excellent for the following applications with regard to size, Amp hour rating, and proper terminal connections: battery backup (for Access Control Systems, Fire Alarm Systems, and Security Alarm Systems), emergency lights, lighted exit signs, and uninterruptible power supplies.

ELK Sealed Lead Acid Batteries are excellent for the following applications with regard to size, Amp hour rating, and proper terminal connections: battery backup (for Access Control Systems, Fire Alarm Systems, and Security Alarm Systems), emergency lights, lighted exit signs, and uninterruptible power supplies.

ELK Sealed Lead Acid Batteries are excellent for the following applications with regard to size, Amp hour rating, and proper terminal connections: battery backup (for Access Control Systems, Fire Alarm Systems, and Security Alarm Systems), emergency lights, lighted exit signs, and uninterruptible power supplies.

ELK Sealed Lead Acid Batteries are excellent for the following applications with regard to size, Amp hour rating, and proper terminal connections: battery backup (for Access Control Systems, Fire Alarm Systems, and Security Alarm Systems), emergency lights, lighted exit signs, and uninterruptible power supplies.

The ELK-WA007 Cellular Antenna works with C1M1LTE units as a secondary antenna to improve cellular signal stability. This antenna is also compatible with the ELK-AEWF Alarm Engine Wi-Fi Adapter.

The ELK-45 is a loud self-contained electronic siren in a compact and attractive housing. This siren draws less current than many competitive units and features the ability to produce two distinct sounds from a single input trigger. The ComboTrigger™ option allows controls which have a single alarm output and pulsing option to activate both the burglar…

The ELK-924 Sensitive Relay module features DPDT (Form “C”) dry contacts for general purpose switching of devices or high current loads. It operates on 12 or 24 volts DC and can be triggered with a negative or positive input at an incredible low current of only 1 milliamp. Also available in a 4 pack (ELK-9244)…

This special cable is needed for connecting the M1 Gold or M1EZ8 Control to the Computer whenever the Computer does not have a conventional RS-232 9-pin serial port. Most modern laptops and many desktop computers are only equipped with USB ports.

This serial ribbon cable is used to connect the M1 Controls main serial port to the M1XEP.

The ELK-IP232 is an Ethernet to RS-232 Serial Port Bridge. It may be used to connect any standard serial communications device such as a PC, an audio/video distribution system, etc., to an Ethernet network. It allows bi-directional communication between the two. It operates as both a network server and a client, which means it is…

The ELK-319KF1 is a Wireless Single Button Handheld device that can be used for a police, medical, or auxiliary panic alarm activation. This sensor is compatible with Elk’s 319MHz Receivers/Panels as well as many other panels that operate on the 319.5MHz frequency. ELK’s 319 Series Sensors are ideal for Interlogix systems in need of replacement…

The ELK-6011 Single Button Remote Panic is updated with stylish new look and replaceable battery! It features a Single press and hold button and Red LED feedback indicator. The typical application for this sensor is for activating a panic or emergency alarm. Designed for use with Elk’s two-way wireless compatible controls: ELK-M1XRFTWM Transceiver and the…

A single door access interface module for use on the M1 and M1EZ8 Control Panels. The M1KAM connects to the 4 wire keypad data bus in place of a traditional M1 Keypad. Since the maximum number of keypads on an M1 or M1EZ8 is 16, the maximum number of M1KAM modules (and controlled doors) is…

The ELK-951 is an RJ31/38X Telephone Jack containing solid state transient suppression designed to protect the Telephone inputs on an alarm control. It responds to power surges and transients in less than 1 nanosecond, automatically restoring after each surge within the specified ratings.

The ELK-150RT is a self-contained siren in a tamper and corrosion resistant stainless steel enclosure. It features two sealed reed tamper switches, one on the back plate and one on the front cover. The switches are normally closed and pre-wired in series. The ELK-150RT can produce two distinct sounds from a single input trigger. The…

The ELK-PRBRT Siren & Strobe Kit combines the 150RT Siren in Stainless Steel Enclosure with the SL1B Blue Weather Resistant Strobe The ELK-150RT is a self-contained siren in a tamper and corrosion resistant stainless steel enclosure. It features two sealed reed tamper switches, one on the back plate and one on the front cover. The…

The ELK-101 is a two channel (Yelp and Steady) siren driver. It is capable of delivering high output volume while consuming very low current draw. It can be powered from 6 or 12 VDC and is compatible with a wide variety of alarm panels.

This slim wireless door & window sensor is ideal for door and window applications and features Elk’s industry leading two-way technology, designed for use with Elk’s two-way wireless compatible controls: ELK-M1XRFTWM Transceiver and the ELK-M1 Control ELK-AERF9 Transceiver and the ELK E27 Alarm Engine Available in white and brown.

The ELK-6053 Wireless Heat Detector is designed for use with Elk’s two-way wireless compatible controls: ELK-M1XRFTWM Transceiver and the ELK-M1 Control ELK-AERF9 Transceiver and the ELK E27 Alarm Engine It is intended for residential applications and incorporates many features designed to ensure its reliable performance. This heat detector provides a two-way solution with built-in sounder…

The ELK-6052 Wireless Smoke & Heat Detector is designed for use with Elk’s two-way wireless compatible controls: ELK-M1XRFTWM Transceiver and the ELK-M1 Control ELK-AERF9 Transceiver and the ELK E27 Alarm Engine It is intended for residential applications and incorporates many features designed to ensure its reliable performance. This smoke detector provides a two-way solution with…

The ELK-1RT is a rugged 30 Watt, 8 Ohm speaker mounted in a tamper resistant, “No Rust” enclosure. It features two sealed reed tamper switches, one on the Back plate and one on the Front Cover. The stainless steel naturally reflects the mounting surface and blends easily with any residential or commercial building.

The ELK-SPBRT Speaker & Strobe Kit combines the 1RT Speaker in Stainless Steel Enclosure with the SL1B Blue Weather Resistant Strobe The ELK-1RT is a rugged 30 Watt, 8 Ohm speaker mounted in a tamper resistant, “No Rust” enclosure. It features two sealed reed tamper switches, one on the Back plate and one on the…

The ELK-SL1B is a weather resistant strobe light designed for easy attachment to ELK’s stainless steel speaker and siren units. An optional wall kit (ELK-WK1) allows the strobe to be mounted to a wall or to single or double gang electrical boxes. The attractive SL1 features simple 12 Volts DC two-wire hookup, low current draw,…

The ELK-SL1C is a weather resistant strobe light designed for easy attachment to ELK’s stainless steel speaker and siren units. An optional wall kit (ELK-WK1) allows the strobe to be mounted to a wall or to single or double gang electrical boxes. The attractive SL1 features simple 12 Volts DC two-wire hookup, low current draw,…

The ELK-SL1R is a weather resistant strobe light designed for easy attachment to ELK’s stainless steel speaker and siren units. An optional wall kit (ELK-WK1) allows the strobe to be mounted to a wall or to single or double gang electrical boxes. The attractive SL1 features simple 12 Volts DC two-wire hookup, low current draw,…

The ELK-WK1 is a an optional wall mount kit for use with the ELK-SL1 Strobe Light. The kit features a decorative snap-on trim cover with all hardware for mounting the strobe to any flat surface or directly to a single or double gang electrical box.

The ELK-P212S is a Supervised Remote Power Supply / Battery Charger, providing 12 VDC output with up to 2 Amps of total current. It supervises the AC Power Input as well as the rechargeable Battery, and can report abnormal conditions back to an ELKM1 Control over the RS485 four (4) wire data bus. It also…

The ELK-RJSET is for use with Alarm System Communicators, Line Fault devices, or other equipment as a means of connecting to the incoming telephone line. Includes USOC RJ31X 8 pin modular surface mount jack and 2 ft. 8 wire modular cord with plug on one end and spade terminals on the other.

The ELK-950 is an RJ31/38X Telephone Jack containing solid state transient suppression designed to protect both the Telephone and Low Voltage AC Transformer inputs on an alarm control. It responds to power surges and transients in less than 1 nanosecond, automatically restoring after each surge within the specified ratings. The ELK-950 is compact and easy…

Pack of 100 self adhesive test data labels for use with the Battery LifeTester™

This package includes: M1 Gold Control Board FREE! Two-Way Wireless Transceiver Two-Way Wireless 4 Button Keyfob M1KP2 LCD Keypad SWB14 Enclosure 1280 8Ah Battery TRG1640 AC Transformer 73 Echo™ Paintable Interior Speaker 952 In-line Telephone Surge Protector RJSET Telco Jack & Cord

The ELK-AEXRFA9 is a kit that consists of the ELK-AERF9 Alarm Engine Two-Way Wireless Transceiver and the ELK-AEXRFA Alarm Engine Bus Adapter for RF Receiver in a plastic clam shell housing.

The Elk UltraProx Wiegand Reader is a compact, technically advanced external proximity reader with 26 bit Wiegand output for use with a separate controller. Compatible with Elk M1 control panels and most other access controllers. Ideal for higher security installations and as an alternative to remembering PIN codes. Learn More About Access Control for Door/Gate…

This universal sensor has 1 built-in reed switch plus 2 external zone inputs (open or closed circuit) which allows it to secure up to 3 doors, windows, etc. It also features Elk’s industry leading two-way technology, designed for use with Elk’s two-way wireless compatible controls: ELK-M1XRFTWM Transceiver and the ELK-M1 Control ELK-AERF9 Transceiver and the…

Retrofitting keypads an other system interfaces can be frustrating, especially when it requires patching a wall. The ELK-CPL Universal Cover Plate solves this problem for faster installations and a clean finished look.

A package of 2 universal rails to mount adapter plates and modules; such as,Telephone, CATV, or Network modules. Accommodates modules from Leviton, OnQ, OpenHouse, and others. Can be mounted to plywood or other manufacturer’s structured wiring boxes.

Allows local programming of M1 control through USB port on C1M1

M1ToGo provides users computer-based, internet remote access to their M1 from anywhere in the world. The secured Windows®-based platform allows users full access to their security system along with lighting and energy management, door/gate access and any other systems connected and controlled through the M1. Unlike cloud based services, M1ToGo provides fast, real time performance…

The ELK-110 Voice “Talking” Driver features high quality digitally pre-recorded voice messages and loud attention getting siren sounds in an economical, low current draw, compact package. It features three input channels (1 for Burglar, 1 for Fire, and 1 for Carbon Monoxide), bilingual voices (English and Spanish), and many unique options which allow it to…

Converts 12 conductor ribbon cable connections to screw terminal connections.

The ELK-319PIRW PIR Motion Sensor is ideal for wall mount applications. It detects movement within a specific area by sensing the infrared energy emitted from a body as it moves across the sensor field of view. This supervised motion sensor features selectable sensitivity and a built-in tamper switch. Utilizing the 319.5 MHz operating frequency, the…

The ELK-319WA is a Supervised, Wireless Water Sensor designed so that the transmitter mounts on a wall or other flat vertical surface, and the remote probe is placed in the location where water leakage is most probable. Moisture forming a bridge between the two metallic contacts on a remote probe is all that is needed…

Our new model features a sleek new design with super fast action and an LED status indicator! The ELK-WSV3 is a professional grade electric water shutoff valve. It is designed for residential and light commercial domestic water applications. Used in conjunction with a 12 VDC controller, leak detection devices, or a simple manual push button,…

The ELK-902-2 premium quality “B” connectors are manufactured from the finest materials. They feature insulation piercing internal teeth, soft brass (easy to squeeze) crimp, a durable protective outer covering, and contains a corrosion resistant silicone gel filling. These wire splices have been used in the telecommunications industry for many years. They provide a solid dependable…

The ELK-319WS is a Supervised, Wireless Window Sensor designed to detect the opening of a window or vibrations made by an intruder attempting to break the window. A built-in reed switch monitors window movement and a piezo shock sensor monitors vibrations. This sensor is compatible with Elk’s 319MHz Receivers/Panels as well as many other panels…

The ELK-900-2 “Yellow Jackets” premium quality “B” connectors are manufactured from the finest materials. They feature insulation piercing internal teeth, soft brass (easy to squeeze) crimp, a durable protective outer covering. These wire splices have been used in the telecommunications industry for many years. They provide a solid dependable splice in wires ranging from 22…